Ammo Case for Drones is an engineered protective case in the military-grade case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
A military-grade protective case is a MIL-SPEC transit container built from modified engineering plastics with one-piece molded construction, IP67 sealing, a -40°C to +80°C service range and impact-resistant structure, verifiable against MIL-STD test profiles.
Ammo Case for Drones: Product & Manufacturer Overview
kexinMaterials supplies the Ammo Case for Drones to defense contractors, law-enforcement suppliers and emergency-response distributors worldwide. Cases can be verified against MIL-STD test profiles including salt fog, vibration and temperature cycling on request.
A dependable Ammo Case for Drones must survive rough handling, extreme temperatures and harsh field conditions while keeping the payload intact. kexinMaterials engineers military-grade protective cases from modified engineering plastics with one-piece molded construction, batch-tested for drop, stacking and immersion performance.
Key Specifications
| Shell material | Modified PP / ABS / Rotomolded PE / Glass-fiber reinforced |
|---|---|
| Protection rating | IP67 (IP68 solutions available) |
| Temperature range | -40°C to +80°C |
| Molding process | Injection molding / Rotational molding |
| Interior | Custom EVA, layered foam, divider systems |
| Testing | Drop, stacking, immersion, salt fog, thermal cycling |
| Customization | Size, color (OD green/black/tan/camo), logo, locks |
| Security | Concealed hinges + anti-pry lip + seal-wire holes |
Product Feature Breakdown
In transit, visible evidence of integrity matters most: fitting Ammo Case for Drones with tamper-seal holes or void-label areas means that even if opening cannot be prevented, the recipient sees the breach immediately. kexinMaterials provides seal-wire holes on all security models.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Protection rating | IP67 (IP68 available, with third-party immersion report) | Mostly IP54–IP65, rarely independently tested |
| Shell material | Modified PP / ABS / rotomolded PE, chosen by load | Generic PP or recycled material, inconsistent |
| Impact structure | One-piece ribbed shell, verified to MIL-STD-810H 516.8 | Thin-wall molding, no drop verification |
| Custom foam | CNC-cut EVA/foam to your equipment 3D data | Universal dividers only, no precision pockets |
| MOQ | From 50 pcs on existing molds, negotiable for tooling | Usually 500–1,000 pcs |
| Certification & delivery | Material/drop/immersion reports, factory audits welcome | Reports missing, lead time unstable |
Standards & Industry Data
Military Drop Test (MIL-STD-810H, Method 516.8 Proc. IV)
MIL-STD-810H (8th revision, 2019; 29 test methods) requires transit-drop samples to survive 26 drops from up to 5 ft (1.5 m) onto steel-backed concrete in varied orientations. Versus 810G, the H revision raised drop height from 4 ft to 5 ft and switched to a harder steel-backed surface.
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Military Vibration (MIL-STD-810H, Method 514.8)
Random-vibration testing spans 20–2,000 Hz to replicate truck, aircraft and battlefield vibration, run for hours per axis; transport spectra cover 2–500 Hz. Passing means the shell-plus-foam system protects precision payloads through long multimodal transit.
Typical Applications
- Defense equipment transport and field deployment
- Law-enforcement gear storage and patrol carry
- Regulated transport of blasting materials
- Emergency-response pre-positioned supplies
- Field testing for defense research institutes
- Security equipment inspection rounds
Product Overview
The kexinMaterials Ammo Case for Drones is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Ammo Case for Drones can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Ammo Case for Drones ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Ammo Case for Drones passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Small and mid-size carry cases are produced by high-pressure injection molding for dimensional precision, while large transit and airdrop cases are rotationally molded for seamless walls and maximum toughness. Every production batch passes drop and seal spot checks before shipment.
Field Case Studies
Customized 1,200 camo tactical cases for carry and patrol gear, CNC-cut to sidearm and body-cam shapes with seal holes and shoulder straps; fielded in 2024 with zero damage reports.
OEM-branded 5,000 OD-green tactical cases with CE/REACH docs, delivered in three batches, >40% repeat rate.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.