Shockproof Diagnostic Case for Cameras is an engineered protective case in the medical case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
A medical equipment case carries first-aid, diagnostic and sampling devices with hygienic, easy-clean materials and custom dividers for fast pre-hospital and field response.
Shockproof Diagnostic Case for Cameras: Product & Manufacturer Overview
Pre-hospital and disaster response add two more requirements: light weight and instant access. kexinMaterials first-aid cases use lightweight compounds and modular layered interiors, one-hand carriable with zone-visible supplies to save golden minutes.
Transporting medical devices, emergency supplies and biological samples demands both physical protection and temperature control. The kexinMaterials Shockproof Diagnostic Case for Cameras range spans first-aid cases, vaccine cold boxes and specimen carriers, built with medical-grade liners and insulated structures for hospitals, CDCs and pharma logistics.
Key Specifications
| Shell material | Modified PP / PE with PU foam insulation |
|---|---|
| Temperature hold | 2–8°C / 15–25°C with ice packs (validated per model) |
| Protection rating | IP67 |
| Liner | Food-grade EVA / medical PE, disinfectable |
| Monitoring | Logger bay, humidity indicator options |
| Compliance | GDP/GSP cold-chain validation support |
| Impact | Validated to MIL-STD-810H, 26-orientation drop |
| Optics protection | Suspended mounting + desiccant bay (RH 40–50%) |
Product Feature Breakdown
Following MIL-STD-810H Method 516.8, drop testing on Shockproof Diagnostic Case for Cameras should cover all 26 orientations — 6 faces, 12 edges, 8 corners. Flat-bottom drops alone are unrepresentative; real failures concentrate on edge and corner strikes. kexinMaterials's military-grade bodies are validated across all 26.
Protecting optics in Shockproof Diagnostic Case for Cameras is about controlling deflection and humidity: lens-group alignment is measured in micrometres, and shell deformation under stacking or impact transmits through the liner to the barrel. kexinMaterials uses suspended supports in optics cases so equipment never sits on the shell's load path.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Clean liner | XLPE cross-linked foam, non-shedding, disinfectable | Generic foam sheds onto instruments |
| Temperature | Optional insulation + ice-pack bay, 2–8°C short hold | No control, cold chain breaks |
| Rating | IP67, blocks liquid ingress | Plain cases not waterproof |
| Labeling | Biohazard/sharps silkscreen supported | No professional marking |
| MOQ | From 50 pcs, infection-control custom | Mostly off-the-shelf |
| Certification | Material & REACH docs provided | Incomplete compliance |
Standards & Industry Data
Foam Inserts (EVA / PU / XLPE)
Three insert materials dominate: EVA (closed-cell, waterproof, firm support for precision instruments), PU foam (open-cell, soft cushioning, economical) and XLPE (chemically inert, non-shedding — preferred for medical and optics). CNC pockets are cut from the equipment's 3D data; drawing-to-first-sample typically takes 1–2 weeks.
Extreme Temperature Performance
Engineering-grade cases typically operate from -30°C to +80°C (military testing follows MIL-STD-810H Methods 501.7/502.7 for temperature and 503.7 for thermal shock, cycling as wide as -40°C↔+71°C). For cold climates choose PP copolymer or PE shells — standard ABS embrittles at low temperatures.
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Typical Applications
- Vaccine and biologics cold-chain delivery
- Ambulance and pre-hospital emergency kits
- Inter-lab biological specimen transfer
- Clinical trial material logistics
- Disaster medical relief pre-positioning
- Corporate and household first-aid storage
Product Overview
The kexinMaterials Shockproof Diagnostic Case for Cameras is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Shockproof Diagnostic Case for Cameras can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Shockproof Diagnostic Case for Cameras ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Shockproof Diagnostic Case for Cameras passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Cold-chain bodies are double-walled and PU-foamed in one operation for gap-free insulation; first-aid cases are lightweight injection molded with modular interiors. Cold models ship with measured temperature-hold curves for your validation files.
Field Case Studies
1,500 vaccine cold-chain cases with XLPE liner and ice-pack bay holding 2–8°C short-term; passed infection-control acceptance.
2,200 surgical-instrument transit cases with biohazard silkscreen and full REACH documentation.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.