Medium Gift Case: confirm internal dimensions first (equipment size plus foam allowance), then protection rating (IP67 is the benchmark) and shell material (PP for value, ABS for surface hardness, rotomolded PE for large sizes). Custom sizes available via tooling.
A trolley case combines a hard protective shell with a telescopic handle and wheels for suitcase-style mobility, ideal for accompanied baggage, trade shows and frequent travel.
Medium Gift Case: Product & Manufacturer Overview
For corporate gifting and procurement, kexinMaterials runs small-batch personalization: corporate-color molding, logo printing or laser engraving and tailored interiors, from 500 pieces.
The kexinMaterials Medium Gift Case shares modified-PP compounds and sealing architecture with our protective line, adds silent spinner wheels and multi-stage aluminum handles — a presentable, dependable answer for engineers' tool kits, sales demos and field equipment.
Key Specifications
| Shell material | Modified PP / ABS+PC |
|---|---|
| Wheels & handle | Silent spinners / multi-stage aluminum |
| Locks | Latch / combination / TSA optional |
| Interior | Display cutouts / tool layers / dividers |
| Use cases | Tool kits, sample demos, field equipment, business travel |
| Customization | Corporate color, logo, interiors, from 500 pcs |
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Wheels | Heavy-duty casters + aluminium trolley, loaded drag | Cheap wheels fail |
| Shell | ABS/PP composite, stack-resistant | Single resin deforms |
| Liner | Zoned fixation foam for gear | No zoning |
| Rating | IP67 optional | Usually non-protected |
| MOQ | From 50 pcs, size custom | Few stock sizes |
| Use | Film/expo/inspection mobility proven | Lacks proof |
Standards & Industry Data
Foam Inserts (EVA / PU / XLPE)
Three insert materials dominate: EVA (closed-cell, waterproof, firm support for precision instruments), PU foam (open-cell, soft cushioning, economical) and XLPE (chemically inert, non-shedding — preferred for medical and optics). CNC pockets are cut from the equipment's 3D data; drawing-to-first-sample typically takes 1–2 weeks.
Shell Materials Compared (PP / ABS / PE)
Industry data puts PP (polypropylene) at ~55% of plastic protective-case share — strong chemical resistance, low-temperature toughness and cost efficiency; ABS holds ~30% with harder, glossier surfaces; large thick-wall cases favor rotomolded PE. Plastic/polymer cases together account for 63.7% of the industrial protective case market (2025).
Military Drop Test (MIL-STD-810H, Method 516.8 Proc. IV)
MIL-STD-810H (8th revision, 2019; 29 test methods) requires transit-drop samples to survive 26 drops from up to 5 ft (1.5 m) onto steel-backed concrete in varied orientations. Versus 810G, the H revision raised drop height from 4 ft to 5 ft and switched to a harder steel-backed surface.
Typical Applications
- Field-service engineer tool kits
- Sales sample presentation cases
- Medical device field visits
- Utility and telecom field equipment
- Corporate gifts and staff kits
- Business travel equipment carry
Sizing & Selection Guide
To size a Medium Gift Case, measure the largest 3D dimensions of the payload and allow 30–50 mm per side for foam, then match against internal case dimensions. Above 30 kg payloads, add wheels and reinforced bases.
kexinMaterials stocks a full size run from personal cases to large transit trunks with published internal dimensions; if nothing fits, we evaluate mold revisions or new tooling — selection advice is free.
Manufacturing Process
Wheel modules and handle systems integrate onto injection-molded shells with metal inserts at every load point. Wheels pass 100,000-cycle rolling tests; handles pass 50,000-cycle pull tests.
Field Case Studies
1,600 mobile gear cases with heavy-duty casters and trolley, easier location moves.
1,200 exhibit-transit cases with zoned foam, faster booth setup.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.