Long Wine Case: confirm internal dimensions first (equipment size plus foam allowance), then protection rating (IP67 is the benchmark) and shell material (PP for value, ABS for surface hardness, rotomolded PE for large sizes). Custom sizes available via tooling.
A trolley case combines a hard protective shell with a telescopic handle and wheels for suitcase-style mobility, ideal for accompanied baggage, trade shows and frequent travel.
Long Wine Case: Product & Manufacturer Overview
The Long Wine Case bridges two worlds: protective-case strength and sealing on one side, business-class looks and feel on the other. kexinMaterials brings military-grade materials down into the business and lifestyle category, built to serve for a decade.
Sample presentation is the high-value use of a Long Wine Case: kexinMaterials cuts display inserts to your sample list with stand-open lids and branding, turning every case opening into a professional pitch.
Key Specifications
| Shell material | Modified PP / ABS+PC |
|---|---|
| Wheels & handle | Silent spinners / multi-stage aluminum |
| Locks | Latch / combination / TSA optional |
| Interior | Display cutouts / tool layers / dividers |
| Use cases | Tool kits, sample demos, field equipment, business travel |
| Customization | Corporate color, logo, interiors, from 500 pcs |
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Wheels | Heavy-duty casters + aluminium trolley, loaded drag | Cheap wheels fail |
| Shell | ABS/PP composite, stack-resistant | Single resin deforms |
| Liner | Zoned fixation foam for gear | No zoning |
| Rating | IP67 optional | Usually non-protected |
| MOQ | From 50 pcs, size custom | Few stock sizes |
| Use | Film/expo/inspection mobility proven | Lacks proof |
Standards & Industry Data
Export Compliance Essentials
EU-bound cases require CE marking and REACH compliance (phthalates such as DEHP/DBP each below 0.1% in soft parts); hard cases sold via Amazon FBA need ISTA 3A transit-drop certification; shipping drones or devices with lithium batteries additionally involves UN38.3 and IATA rules. A legitimate source factory provides these test reports directly.
Military Drop Test (MIL-STD-810H, Method 516.8 Proc. IV)
MIL-STD-810H (8th revision, 2019; 29 test methods) requires transit-drop samples to survive 26 drops from up to 5 ft (1.5 m) onto steel-backed concrete in varied orientations. Versus 810G, the H revision raised drop height from 4 ft to 5 ft and switched to a harder steel-backed surface.
Shell Materials Compared (PP / ABS / PE)
Industry data puts PP (polypropylene) at ~55% of plastic protective-case share — strong chemical resistance, low-temperature toughness and cost efficiency; ABS holds ~30% with harder, glossier surfaces; large thick-wall cases favor rotomolded PE. Plastic/polymer cases together account for 63.7% of the industrial protective case market (2025).
Typical Applications
- Field-service engineer tool kits
- Sales sample presentation cases
- Medical device field visits
- Utility and telecom field equipment
- Corporate gifts and staff kits
- Business travel equipment carry
Sizing & Selection Guide
To size a Long Wine Case, measure the largest 3D dimensions of the payload and allow 30–50 mm per side for foam, then match against internal case dimensions. Above 30 kg payloads, add wheels and reinforced bases.
kexinMaterials stocks a full size run from personal cases to large transit trunks with published internal dimensions; if nothing fits, we evaluate mold revisions or new tooling — selection advice is free.
Manufacturing Process
Wheel modules and handle systems integrate onto injection-molded shells with metal inserts at every load point. Wheels pass 100,000-cycle rolling tests; handles pass 50,000-cycle pull tests.
Field Case Studies
1,600 mobile gear cases with heavy-duty casters and trolley, easier location moves.
1,200 exhibit-transit cases with zoned foam, faster booth setup.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.