Large Specimen Transport Case: confirm internal dimensions first (equipment size plus foam allowance), then protection rating (IP67 is the benchmark) and shell material (PP for value, ABS for surface hardness, rotomolded PE for large sizes). Custom sizes available via tooling.
A medical equipment case carries first-aid, diagnostic and sampling devices with hygienic, easy-clean materials and custom dividers for fast pre-hospital and field response.
Large Specimen Transport Case: Product & Manufacturer Overview
For buyers, the true cost of a Large Specimen Transport Case is more than unit price: carton specs shape freight, and spare parts and replenishment shape long-term use. kexinMaterials optimizes container loading and ships wear-part kits with volume orders to lower your total cost of ownership.
Reliability in a Large Specimen Transport Case comes from structure: kexinMaterials combines PU-foamed insulation walls with sealed shells and dedicated ice-pack bays, holding 2–8°C for 48+ hours under standard load (model and ambient dependent), with mounting points for temperature data loggers.
Key Specifications
| Shell material | Modified PP / PE with PU foam insulation |
|---|---|
| Temperature hold | 2–8°C / 15–25°C with ice packs (validated per model) |
| Protection rating | IP67 |
| Liner | Food-grade EVA / medical PE, disinfectable |
| Monitoring | Logger bay, humidity indicator options |
| Compliance | GDP/GSP cold-chain validation support |
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Clean liner | XLPE cross-linked foam, non-shedding, disinfectable | Generic foam sheds onto instruments |
| Temperature | Optional insulation + ice-pack bay, 2–8°C short hold | No control, cold chain breaks |
| Rating | IP67, blocks liquid ingress | Plain cases not waterproof |
| Labeling | Biohazard/sharps silkscreen supported | No professional marking |
| MOQ | From 50 pcs, infection-control custom | Mostly off-the-shelf |
| Certification | Material & REACH docs provided | Incomplete compliance |
Large-format note: cases over 800 mm per side are best rotomolded — seamless walls, high tear resistance — and should add wheels, forklift channels and multi-person handles.
Standards & Industry Data
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Foam Inserts (EVA / PU / XLPE)
Three insert materials dominate: EVA (closed-cell, waterproof, firm support for precision instruments), PU foam (open-cell, soft cushioning, economical) and XLPE (chemically inert, non-shedding — preferred for medical and optics). CNC pockets are cut from the equipment's 3D data; drawing-to-first-sample typically takes 1–2 weeks.
Export Compliance Essentials
EU-bound cases require CE marking and REACH compliance (phthalates such as DEHP/DBP each below 0.1% in soft parts); hard cases sold via Amazon FBA need ISTA 3A transit-drop certification; shipping drones or devices with lithium batteries additionally involves UN38.3 and IATA rules. A legitimate source factory provides these test reports directly.
Typical Applications
- Vaccine and biologics cold-chain delivery
- Ambulance and pre-hospital emergency kits
- Inter-lab biological specimen transfer
- Clinical trial material logistics
- Disaster medical relief pre-positioning
- Corporate and household first-aid storage
Sizing & Selection Guide
To size a Large Specimen Transport Case, measure the largest 3D dimensions of the payload and allow 30–50 mm per side for foam, then match against internal case dimensions. Above 30 kg payloads, add wheels and reinforced bases.
kexinMaterials stocks a full size run from personal cases to large transit trunks with published internal dimensions; if nothing fits, we evaluate mold revisions or new tooling — selection advice is free.
Manufacturing Process
Cold-chain bodies are double-walled and PU-foamed in one operation for gap-free insulation; first-aid cases are lightweight injection molded with modular interiors. Cold models ship with measured temperature-hold curves for your validation files.
Field Case Studies
1,500 vaccine cold-chain cases with XLPE liner and ice-pack bay holding 2–8°C short-term; passed infection-control acceptance.
2,200 surgical-instrument transit cases with biohazard silkscreen and full REACH documentation.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.