Heavy Duty Lab Equipment Case for Energy Storage is an engineered protective case in the instrument case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
An instrument case protects precision measuring and testing equipment in transit, emphasizing shock absorption, moisture resistance and custom foam so instruments stay calibrated between lab and field.
Heavy Duty Lab Equipment Case for Energy Storage: Product & Manufacturer Overview
The kexinMaterials Heavy Duty Lab Equipment Case for Energy Storage uses a hard-shell-plus-layered-cushion architecture: a one-piece engineering plastic exterior against impact and crushing, and a CNC-cut EVA or PU foam interior shaped to the instrument, with desiccant chambers and humidity indicators to manage condensation risk.
The Heavy Duty Lab Equipment Case for Energy Storage can be tailored to your brand and project: case color, silk-print or laser-engraved logo, foam layout and handle/wheel options are all adjustable. kexinMaterials, as the source factory, runs the whole journey from sample approval to mass production, including neutral shipping and OEM private label.
Key Specifications
| Shell material | Modified PP / ABS / aluminum-frame composite |
|---|---|
| Protection rating | IP67 |
| Interior | Custom EVA / PU foam / anti-static foam |
| Pressure relief | Automatic equalization valve (air freight ready) |
| Fits | Surveying, testing, analysis, telecom, metrology instruments |
| Options | Humidity indicator, desiccant chamber, nameplate, co-packing |
| Durability | Seal re-tested at 500 cycles, compression set <25% |
| Battery | UL94 V-0 liner + cell isolation + vent path |
Product Feature Breakdown
Built for heavy duty, Heavy Duty Lab Equipment Case for Energy Storage is designed for predictable failure rather than indestructibility: kexinMaterials ensures replaceable parts — latches, handles — fail before the shell does, so a field part swap returns the case to service instead of scrapping it.
Lithium transport is tightly governed by IATA DGR / UN38.3: Heavy Duty Lab Equipment Case for Energy Storage must be matched to a packaging level based on cell watt-hours and transport mode, with short-circuit protection (terminal insulation, cell separation). kexinMaterials helps match UN-certified packaging and designs the insert layout.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Protection | IP67, thermal-shock verified -40°C↔+71°C | Plain cases fail thermal shock |
| Damping foam | EVA/PU/XLPE CNC-cut to instrument shape | Generic foam under-cushions |
| ESD & clean | Optional anti-static liner, non-shedding XLPE | Sheds debris onto optics |
| Rigidity | ABS high surface hardness, high crush strength | PP softens under stacking |
| MOQ | From 50 pcs, non-standard sizes toolable | Often 500 pcs min |
| Certification | Drop/vibration test reports provided | Incomplete docs |
Large-format note: cases over 800 mm per side are best rotomolded — seamless walls, high tear resistance — and should add wheels, forklift channels and multi-person handles.
Standards & Industry Data
Foam Inserts (EVA / PU / XLPE)
Three insert materials dominate: EVA (closed-cell, waterproof, firm support for precision instruments), PU foam (open-cell, soft cushioning, economical) and XLPE (chemically inert, non-shedding — preferred for medical and optics). CNC pockets are cut from the equipment's 3D data; drawing-to-first-sample typically takes 1–2 weeks.
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Military Vibration (MIL-STD-810H, Method 514.8)
Random-vibration testing spans 20–2,000 Hz to replicate truck, aircraft and battlefield vibration, run for hours per axis; transport spectra cover 2–500 Hz. Passing means the shell-plus-foam system protects precision payloads through long multimodal transit.
Typical Applications
- Surveying instrument field carry
- Third-party lab on-site sampling
- Metrology equipment calibration logistics
- Fiber-optic construction toolkits
- Laboratory relocation and equipment loans
- Manufacturer co-packing programs
Product Overview
The kexinMaterials Heavy Duty Lab Equipment Case for Energy Storage is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Heavy Duty Lab Equipment Case for Energy Storage can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Heavy Duty Lab Equipment Case for Energy Storage ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Heavy Duty Lab Equipment Case for Energy Storage passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
High-pressure injection molding keeps shell tolerances tight for reliable sealing, and inserts are CNC-cut after drop-simulation checks. Volume co-packing projects follow a PDI inspection routine so cushioning performance stays consistent across batches.
Field Case Studies
600 anti-static liner cases for precision calibrators using non-shedding XLPE; zero scratch incidents in annual off-site checks.
3,000 cases CNC-cut to probe shapes, thermal-shock verified -40°C↔+71°C, protecting gear across overseas expos.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.