Dustproof Weapon Case for Rescue is an engineered protective case in the military-grade case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
A military-grade protective case is a MIL-SPEC transit container built from modified engineering plastics with one-piece molded construction, IP67 sealing, a -40°C to +80°C service range and impact-resistant structure, verifiable against MIL-STD test profiles.
Dustproof Weapon Case for Rescue: Product & Manufacturer Overview
kexinMaterials supplies the Dustproof Weapon Case for Rescue to defense contractors, law-enforcement suppliers and emergency-response distributors worldwide. Cases can be verified against MIL-STD test profiles including salt fog, vibration and temperature cycling on request.
The Dustproof Weapon Case for Rescue can be tailored to your brand and project: case color, silk-print or laser-engraved logo, foam layout and handle/wheel options are all adjustable. kexinMaterials, as the source factory, runs the whole journey from sample approval to mass production, including neutral shipping and OEM private label.
Key Specifications
| Shell material | Modified PP / ABS / Rotomolded PE / Glass-fiber reinforced |
|---|---|
| Protection rating | IP67 (IP68 solutions available) |
| Temperature range | -40°C to +80°C |
| Molding process | Injection molding / Rotational molding |
| Interior | Custom EVA, layered foam, divider systems |
| Testing | Drop, stacking, immersion, salt fog, thermal cycling |
| Customization | Size, color (OD green/black/tan/camo), logo, locks |
| Dust rating | IP6X (talc chamber, 2 h under negative pressure) |
| Emergency design | One-hand latches, >100° lid, reflective marking |
Product Feature Breakdown
IP6X on Dustproof Weapon Case for Rescue means total dust exclusion, verified by holding the case under negative pressure in a talc chamber for two hours with no deposit. It hinges on gasket continuity and the flatness of the mating faces; kexinMaterials CNC-trims the parting line to ensure even clamping.
Response cases must work at night and in low visibility: specify high-contrast body colours (orange/yellow) with reflective tape and fluorescent markings on Dustproof Weapon Case for Rescue, plus colour-zoned inserts so a missing item is visible at a glance. kexinMaterials offers EN ISO 20471 compliant reflective options.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Protection rating | IP67 (IP68 available, with third-party immersion report) | Mostly IP54–IP65, rarely independently tested |
| Shell material | Modified PP / ABS / rotomolded PE, chosen by load | Generic PP or recycled material, inconsistent |
| Impact structure | One-piece ribbed shell, verified to MIL-STD-810H 516.8 | Thin-wall molding, no drop verification |
| Custom foam | CNC-cut EVA/foam to your equipment 3D data | Universal dividers only, no precision pockets |
| MOQ | From 50 pcs on existing molds, negotiable for tooling | Usually 500–1,000 pcs |
| Certification & delivery | Material/drop/immersion reports, factory audits welcome | Reports missing, lead time unstable |
Standards & Industry Data
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Military Drop Test (MIL-STD-810H, Method 516.8 Proc. IV)
MIL-STD-810H (8th revision, 2019; 29 test methods) requires transit-drop samples to survive 26 drops from up to 5 ft (1.5 m) onto steel-backed concrete in varied orientations. Versus 810G, the H revision raised drop height from 4 ft to 5 ft and switched to a harder steel-backed surface.
Extreme Temperature Performance
Engineering-grade cases typically operate from -30°C to +80°C (military testing follows MIL-STD-810H Methods 501.7/502.7 for temperature and 503.7 for thermal shock, cycling as wide as -40°C↔+71°C). For cold climates choose PP copolymer or PE shells — standard ABS embrittles at low temperatures.
Typical Applications
- Defense equipment transport and field deployment
- Law-enforcement gear storage and patrol carry
- Regulated transport of blasting materials
- Emergency-response pre-positioned supplies
- Field testing for defense research institutes
- Security equipment inspection rounds
Product Overview
The kexinMaterials Dustproof Weapon Case for Rescue is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Dustproof Weapon Case for Rescue can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Dustproof Weapon Case for Rescue ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Dustproof Weapon Case for Rescue passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Small and mid-size carry cases are produced by high-pressure injection molding for dimensional precision, while large transit and airdrop cases are rotationally molded for seamless walls and maximum toughness. Every production batch passes drop and seal spot checks before shipment.
Field Case Studies
Customized 1,200 camo tactical cases for carry and patrol gear, CNC-cut to sidearm and body-cam shapes with seal holes and shoulder straps; fielded in 2024 with zero damage reports.
OEM-branded 5,000 OD-green tactical cases with CE/REACH docs, delivered in three batches, >40% repeat rate.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.