Dustproof Quadcopter Case for Outdoor is an engineered protective case in the drone case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
A drone case is a purpose-built transport case for quadcopters, batteries and controllers, with CNC-cut EVA or foam inserts shaped to the airframe to prevent impact and vibration damage in transit.
Dustproof Quadcopter Case for Outdoor: Product & Manufacturer Overview
kexinMaterials pairs impact-resistant molded shells with CNC-cut EVA interiors matched to your airframe. Popular mapping, spraying and inspection platforms are already in our insert database; for custom builds we 3D-scan the aircraft and cut a dedicated layout for props, gimbal, batteries and controller.
A professional Dustproof Quadcopter Case for Outdoor has to solve three problems at once: shock isolation, weather sealing and lithium-battery safety. kexinMaterials builds a complete range of hard cases for the drone economy, from FPV backpacks to agricultural-drone transit cases, available off-the-shelf or fully customized.
Key Specifications
| Shell material | Modified PP / ABS / molded EVA composite |
|---|---|
| Protection rating | IP67 |
| Interior | Airframe-specific EVA, anti-static foam, LiPo-safe compartment |
| Carry options | Handle / trolley wheels / hard-shell backpack |
| Fits | Multirotor UAVs, FPV drones, underwater ROVs, robots & accessories |
| Customization | 3D-scan foam cutting, logo printing, colors, co-packing |
| Dust rating | IP6X (talc chamber, 2 h under negative pressure) |
| Outdoor rating | UV stabilised, 500 h QUV validated |
Product Feature Breakdown
IP6X on Dustproof Quadcopter Case for Outdoor means total dust exclusion, verified by holding the case under negative pressure in a talc chamber for two hours with no deposit. It hinges on gasket continuity and the flatness of the mating faces; kexinMaterials CNC-trims the parting line to ensure even clamping.
Field temperature swings create pressure differentials in sealed cases: Dustproof Quadcopter Case for Outdoor heats up in daytime sun and cools sharply at night, drawing moist air inward over repeated cycles. An automatic purge valve is mandatory rather than optional on outdoor sealed cases; kexinMaterials fits one across the sealed range.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Protection | IP67 + silicone gasket + pressure valve for field use | Often unsealed, risky in rain |
| Foam | Model-specific CNC-cut library (mapping/spraying/inspection) | Generic foam, props/gimbal crushed |
| Battery safety | Separate battery bay, flame-retardant foam, venting | Batteries mixed with airframe, no isolation |
| Strength/weight | Modified PP copolymer, thin yet tough, lighter kit | Uneven walls, heavier overall |
| MOQ | Stock for popular models, custom from 100 pcs | Mostly reselling, high custom barrier |
| Export docs | UN38.3 / ISTA 3A guidance provided | Compliance docs missing |
Standards & Industry Data
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Military Drop Test (MIL-STD-810H, Method 516.8 Proc. IV)
MIL-STD-810H (8th revision, 2019; 29 test methods) requires transit-drop samples to survive 26 drops from up to 5 ft (1.5 m) onto steel-backed concrete in varied orientations. Versus 810G, the H revision raised drop height from 4 ft to 5 ft and switched to a harder steel-backed surface.
Export Compliance Essentials
EU-bound cases require CE marking and REACH compliance (phthalates such as DEHP/DBP each below 0.1% in soft parts); hard cases sold via Amazon FBA need ISTA 3A transit-drop certification; shipping drones or devices with lithium batteries additionally involves UN38.3 and IATA rules. A legitimate source factory provides these test reports directly.
Typical Applications
- Mapping and inspection UAV field operations
- Agricultural drone transport between sites
- Underwater ROV dockside and onboard storage
- FPV racing and training carry
- OEM co-packing for drone manufacturers
- Robot prototype shipping for R&D labs
Product Overview
The kexinMaterials Dustproof Quadcopter Case for Outdoor is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Dustproof Quadcopter Case for Outdoor can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Dustproof Quadcopter Case for Outdoor ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Dustproof Quadcopter Case for Outdoor passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Injection-molded shells deliver maximum protection for complete aircraft and ground stations, while thermo-compressed EVA composite shells serve weight-critical backpack applications. Battery compartments use flame-retardant compounds with engineered vent paths.
Field Case Studies
Developed 8,000 transit cases with separate blade and battery bays; zero transport-damage complaints across the 2023 peak season.
1,500 CNC-cut cases for a hexacopter with tablet and controller bays, passing ISTA 3A transit testing.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.