Dustproof First Aid Case for Cameras is an engineered protective case in the medical case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
A medical equipment case carries first-aid, diagnostic and sampling devices with hygienic, easy-clean materials and custom dividers for fast pre-hospital and field response.
Dustproof First Aid Case for Cameras: Product & Manufacturer Overview
Reliability in a Dustproof First Aid Case for Cameras comes from structure: kexinMaterials combines PU-foamed insulation walls with sealed shells and dedicated ice-pack bays, holding 2–8°C for 48+ hours under standard load (model and ambient dependent), with mounting points for temperature data loggers.
Pre-hospital and disaster response add two more requirements: light weight and instant access. kexinMaterials first-aid cases use lightweight compounds and modular layered interiors, one-hand carriable with zone-visible supplies to save golden minutes.
Key Specifications
| Shell material | Modified PP / PE with PU foam insulation |
|---|---|
| Temperature hold | 2–8°C / 15–25°C with ice packs (validated per model) |
| Protection rating | IP67 |
| Liner | Food-grade EVA / medical PE, disinfectable |
| Monitoring | Logger bay, humidity indicator options |
| Compliance | GDP/GSP cold-chain validation support |
| Dust rating | IP6X (talc chamber, 2 h under negative pressure) |
| Optics protection | Suspended mounting + desiccant bay (RH 40–50%) |
Product Feature Breakdown
IP6X on Dustproof First Aid Case for Cameras means total dust exclusion, verified by holding the case under negative pressure in a talc chamber for two hours with no deposit. It hinges on gasket continuity and the flatness of the mating faces; kexinMaterials CNC-trims the parting line to ensure even clamping.
Fungus is the primary threat to glass: hold internal RH at 40–50% inside Dustproof First Aid Case for Cameras with replaceable desiccant and an indicator card, and inspect quarterly during long-term storage. kexinMaterials offers desiccant compartments with a viewing window.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Clean liner | XLPE cross-linked foam, non-shedding, disinfectable | Generic foam sheds onto instruments |
| Temperature | Optional insulation + ice-pack bay, 2–8°C short hold | No control, cold chain breaks |
| Rating | IP67, blocks liquid ingress | Plain cases not waterproof |
| Labeling | Biohazard/sharps silkscreen supported | No professional marking |
| MOQ | From 50 pcs, infection-control custom | Mostly off-the-shelf |
| Certification | Material & REACH docs provided | Incomplete compliance |
Standards & Industry Data
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Export Compliance Essentials
EU-bound cases require CE marking and REACH compliance (phthalates such as DEHP/DBP each below 0.1% in soft parts); hard cases sold via Amazon FBA need ISTA 3A transit-drop certification; shipping drones or devices with lithium batteries additionally involves UN38.3 and IATA rules. A legitimate source factory provides these test reports directly.
Foam Inserts (EVA / PU / XLPE)
Three insert materials dominate: EVA (closed-cell, waterproof, firm support for precision instruments), PU foam (open-cell, soft cushioning, economical) and XLPE (chemically inert, non-shedding — preferred for medical and optics). CNC pockets are cut from the equipment's 3D data; drawing-to-first-sample typically takes 1–2 weeks.
Typical Applications
- Vaccine and biologics cold-chain delivery
- Ambulance and pre-hospital emergency kits
- Inter-lab biological specimen transfer
- Clinical trial material logistics
- Disaster medical relief pre-positioning
- Corporate and household first-aid storage
Product Overview
The kexinMaterials Dustproof First Aid Case for Cameras is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Dustproof First Aid Case for Cameras can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Dustproof First Aid Case for Cameras ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Dustproof First Aid Case for Cameras passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Cold-chain bodies are double-walled and PU-foamed in one operation for gap-free insulation; first-aid cases are lightweight injection molded with modular interiors. Cold models ship with measured temperature-hold curves for your validation files.
Field Case Studies
1,500 vaccine cold-chain cases with XLPE liner and ice-pack bay holding 2–8°C short-term; passed infection-control acceptance.
2,200 surgical-instrument transit cases with biohazard silkscreen and full REACH documentation.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.