Drop-proof UV-resistant Case OEM Service: send your equipment dimensions or 3D files and kexinMaterials returns a free case-selection and foam-layout proposal, prototypes from its in-house tool shop, and supports logo, color and packaging customization.
A waterproof case uses a silicone gasket and latches to achieve IP67 dust-tight and watertight protection, suited to marine, outdoor and rescue use where gear must stay dry after brief immersion.
Drop-proof UV-resistant Case OEM Service: Product & Manufacturer Overview
Outdoor work demands waterproofing, crush resistance and buoyancy margin in one shell. kexinMaterials cases offer positive buoyancy references under rated loads, lockable latches and shoulder systems for on-water operations and island logistics.
kexinMaterials is a factory-direct waterproof case manufacturer in Guangdong with self-developed tooling, covering sizes from 10-inch personal cases to 50-inch equipment trunks — colors, interiors and logos all customizable for wholesale and OEM programs.
Key Specifications
| Shell material | UV-stabilized modified PP / ABS |
|---|---|
| Protection rating | IP67 (1 m immersion, 30 min) |
| Temperature range | -30°C to +80°C |
| Sealing | Continuous silicone gasket + auto relief valve |
| Closure | Dual/triple latches, padlock-ready |
| Customization | Colors, interior (EVA/dividers/empty), logo, wheels |
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Rating | IP67 standard, IP68/IPX6 optional | Splash-only, floods when immersed |
| Sealing | Silicone gasket + auto pressure-equalization valve | No valve, collapses at altitude |
| Weathering | UV-stable modified PP, salt-fog resistant | Generic resin yellows outdoors |
| Latches | Waterproof latches with rubber gasket | Plain clasps leak |
| MOQ | From 50 pcs, custom colors | High batch barrier |
| Proven use | Marine/diving/fishing field cases | Lacks scenario proof |
Standards & Industry Data
IP68 vs IP67 (IEC 60529)
IP68 covers continuous immersion. IEC 60529 does not fix a universal depth or duration — the manufacturer declares conditions that must exceed IP67 (typically 2–10 m). Always request the test certificate to confirm the actual depth/duration rather than relying on the “IP68” label alone.
Extreme Temperature Performance
Engineering-grade cases typically operate from -30°C to +80°C (military testing follows MIL-STD-810H Methods 501.7/502.7 for temperature and 503.7 for thermal shock, cycling as wide as -40°C↔+71°C). For cold climates choose PP copolymer or PE shells — standard ABS embrittles at low temperatures.
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Typical Applications
- Overlanding and expedition gear storage
- Marine fishing and boat equipment
- Photography gear in the field
- Emergency-response equipment staging
- Water sports and dive gear transport
- Utility line-inspection tool carry
OEM / ODM Custom Manufacturing
kexinMaterials runs full OEM/ODM programs on the Drop-proof UV-resistant Case OEM Service: drawing/sample quotation, 3D structural design, in-house tooling (35–45 days), pilot runs and mass production — under NDA throughout.
The standard private-label flow for the Drop-proof UV-resistant Case OEM Service: requirement review → proposal & quote (1–3 days) → sample approval (7–15 days) → production (15–30 days) → QC & shipment. Logos via silk print, laser engraving, hot stamping or in-mold labeling.
Need speed instead of tooling? Choose tooling-free private label: adopt an existing kexinMaterials mold, switch colors and branding, and launch from just 100 pcs — the fastest route for new case brands.
Manufacturing Process
The whole range is high-pressure injection molded with gasket-channel tolerances held to the 0.1 mm class. Each batch is sample-tested with a 1-meter, 30-minute immersion to keep IP67 performance consistent.
Field Case Studies
2,000 marine equipment cases, IP68 + UV-stable, no aging or leakage after 18 months in salt spray.
900 dive-gear cases with pressure-equalization valves, no collapse during high-altitude transit.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.