Deep Outdoor Case: confirm internal dimensions first (equipment size plus foam allowance), then protection rating (IP67 is the benchmark) and shell material (PP for value, ABS for surface hardness, rotomolded PE for large sizes). Custom sizes available via tooling.
A waterproof case uses a silicone gasket and latches to achieve IP67 dust-tight and watertight protection, suited to marine, outdoor and rescue use where gear must stay dry after brief immersion.
Deep Outdoor Case: Product & Manufacturer Overview
kexinMaterials is a factory-direct waterproof case manufacturer in Guangdong with self-developed tooling, covering sizes from 10-inch personal cases to 50-inch equipment trunks — colors, interiors and logos all customizable for wholesale and OEM programs.
A Deep Outdoor Case exists so your valuable gear ignores rain, immersion and dust. The kexinMaterials waterproof range starts at IP67, built on full-perimeter silicone seals and dual latch closure, serving outdoor sports, expedition photography, marine fishing and emergency response.
Key Specifications
| Shell material | UV-stabilized modified PP / ABS |
|---|---|
| Protection rating | IP67 (1 m immersion, 30 min) |
| Temperature range | -30°C to +80°C |
| Sealing | Continuous silicone gasket + auto relief valve |
| Closure | Dual/triple latches, padlock-ready |
| Customization | Colors, interior (EVA/dividers/empty), logo, wheels |
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Rating | IP67 standard, IP68/IPX6 optional | Splash-only, floods when immersed |
| Sealing | Silicone gasket + auto pressure-equalization valve | No valve, collapses at altitude |
| Weathering | UV-stable modified PP, salt-fog resistant | Generic resin yellows outdoors |
| Latches | Waterproof latches with rubber gasket | Plain clasps leak |
| MOQ | From 50 pcs, custom colors | High batch barrier |
| Proven use | Marine/diving/fishing field cases | Lacks scenario proof |
Standards & Industry Data
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Extreme Temperature Performance
Engineering-grade cases typically operate from -30°C to +80°C (military testing follows MIL-STD-810H Methods 501.7/502.7 for temperature and 503.7 for thermal shock, cycling as wide as -40°C↔+71°C). For cold climates choose PP copolymer or PE shells — standard ABS embrittles at low temperatures.
IP68 vs IP67 (IEC 60529)
IP68 covers continuous immersion. IEC 60529 does not fix a universal depth or duration — the manufacturer declares conditions that must exceed IP67 (typically 2–10 m). Always request the test certificate to confirm the actual depth/duration rather than relying on the “IP68” label alone.
Typical Applications
- Overlanding and expedition gear storage
- Marine fishing and boat equipment
- Photography gear in the field
- Emergency-response equipment staging
- Water sports and dive gear transport
- Utility line-inspection tool carry
Sizing & Selection Guide
To size a Deep Outdoor Case, measure the largest 3D dimensions of the payload and allow 30–50 mm per side for foam, then match against internal case dimensions. Above 30 kg payloads, add wheels and reinforced bases.
kexinMaterials stocks a full size run from personal cases to large transit trunks with published internal dimensions; if nothing fits, we evaluate mold revisions or new tooling — selection advice is free.
Manufacturing Process
The whole range is high-pressure injection molded with gasket-channel tolerances held to the 0.1 mm class. Each batch is sample-tested with a 1-meter, 30-minute immersion to keep IP67 performance consistent.
Field Case Studies
2,000 marine equipment cases, IP68 + UV-stable, no aging or leakage after 18 months in salt spray.
900 dive-gear cases with pressure-equalization valves, no collapse during high-altitude transit.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.