Anti-Static Molle Case for Cameras is an engineered protective case in the military-grade case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
A military-grade protective case is a MIL-SPEC transit container built from modified engineering plastics with one-piece molded construction, IP67 sealing, a -40°C to +80°C service range and impact-resistant structure, verifiable against MIL-STD test profiles.
Anti-Static Molle Case for Cameras: Product & Manufacturer Overview
From individual carry cases to large transit and airdrop containers, kexinMaterials manufactures the Anti-Static Molle Case for Cameras range in-house across injection molding, rotational molding and blow molding lines. Tooling is developed internally, which keeps lead times short and unit costs competitive for B2B buyers.
kexinMaterials supplies the Anti-Static Molle Case for Cameras to defense contractors, law-enforcement suppliers and emergency-response distributors worldwide. Cases can be verified against MIL-STD test profiles including salt fog, vibration and temperature cycling on request.
Key Specifications
| Shell material | Modified PP / ABS / Rotomolded PE / Glass-fiber reinforced |
|---|---|
| Protection rating | IP67 (IP68 solutions available) |
| Temperature range | -40°C to +80°C |
| Molding process | Injection molding / Rotational molding |
| Interior | Custom EVA, layered foam, divider systems |
| Testing | Drop, stacking, immersion, salt fog, thermal cycling |
| Customization | Size, color (OD green/black/tan/camo), logo, locks |
| ESD | Surface resistivity 10⁶–10⁹Ω (permanent, ANSI/ESD S541) |
| Optics protection | Suspended mounting + desiccant bay (RH 40–50%) |
Product Feature Breakdown
Permanent ESD materials (carbon masterbatch) and topical treatments differ enormously in service life: if Anti-Static Molle Case for Cameras will be washed and reused repeatedly, specify permanent — topical antistats stop working after a few wipe-downs. kexinMaterials supplies permanent ESD bodies as standard.
Protecting optics in Anti-Static Molle Case for Cameras is about controlling deflection and humidity: lens-group alignment is measured in micrometres, and shell deformation under stacking or impact transmits through the liner to the barrel. kexinMaterials uses suspended supports in optics cases so equipment never sits on the shell's load path.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Protection rating | IP67 (IP68 available, with third-party immersion report) | Mostly IP54–IP65, rarely independently tested |
| Shell material | Modified PP / ABS / rotomolded PE, chosen by load | Generic PP or recycled material, inconsistent |
| Impact structure | One-piece ribbed shell, verified to MIL-STD-810H 516.8 | Thin-wall molding, no drop verification |
| Custom foam | CNC-cut EVA/foam to your equipment 3D data | Universal dividers only, no precision pockets |
| MOQ | From 50 pcs on existing molds, negotiable for tooling | Usually 500–1,000 pcs |
| Certification & delivery | Material/drop/immersion reports, factory audits welcome | Reports missing, lead time unstable |
ESD protection: interior materials hold surface resistance in the 10^6–10^9 ohm range, with conductive shell compounds optional, protecting PCBs and static-sensitive devices.
Standards & Industry Data
Shell Materials Compared (PP / ABS / PE)
Industry data puts PP (polypropylene) at ~55% of plastic protective-case share — strong chemical resistance, low-temperature toughness and cost efficiency; ABS holds ~30% with harder, glossier surfaces; large thick-wall cases favor rotomolded PE. Plastic/polymer cases together account for 63.7% of the industrial protective case market (2025).
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Extreme Temperature Performance
Engineering-grade cases typically operate from -30°C to +80°C (military testing follows MIL-STD-810H Methods 501.7/502.7 for temperature and 503.7 for thermal shock, cycling as wide as -40°C↔+71°C). For cold climates choose PP copolymer or PE shells — standard ABS embrittles at low temperatures.
Typical Applications
- Defense equipment transport and field deployment
- Law-enforcement gear storage and patrol carry
- Regulated transport of blasting materials
- Emergency-response pre-positioned supplies
- Field testing for defense research institutes
- Security equipment inspection rounds
Product Overview
The kexinMaterials Anti-Static Molle Case for Cameras is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Anti-Static Molle Case for Cameras can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Anti-Static Molle Case for Cameras ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Anti-Static Molle Case for Cameras passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Small and mid-size carry cases are produced by high-pressure injection molding for dimensional precision, while large transit and airdrop cases are rotationally molded for seamless walls and maximum toughness. Every production batch passes drop and seal spot checks before shipment.
Field Case Studies
Customized 1,200 camo tactical cases for carry and patrol gear, CNC-cut to sidearm and body-cam shapes with seal holes and shoulder straps; fielded in 2024 with zero damage reports.
OEM-branded 5,000 OD-green tactical cases with CE/REACH docs, delivered in three batches, >40% repeat rate.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.