Anti-Static First Aid Case for Broadcasting is an engineered protective case in the medical case family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
A medical equipment case carries first-aid, diagnostic and sampling devices with hygienic, easy-clean materials and custom dividers for fast pre-hospital and field response.
Anti-Static First Aid Case for Broadcasting: Product & Manufacturer Overview
Transporting medical devices, emergency supplies and biological samples demands both physical protection and temperature control. The kexinMaterials Anti-Static First Aid Case for Broadcasting range spans first-aid cases, vaccine cold boxes and specimen carriers, built with medical-grade liners and insulated structures for hospitals, CDCs and pharma logistics.
Pre-hospital and disaster response add two more requirements: light weight and instant access. kexinMaterials first-aid cases use lightweight compounds and modular layered interiors, one-hand carriable with zone-visible supplies to save golden minutes.
Key Specifications
| Shell material | Modified PP / PE with PU foam insulation |
|---|---|
| Temperature hold | 2–8°C / 15–25°C with ice packs (validated per model) |
| Protection rating | IP67 |
| Liner | Food-grade EVA / medical PE, disinfectable |
| Monitoring | Logger bay, humidity indicator options |
| Compliance | GDP/GSP cold-chain validation support |
| ESD | Surface resistivity 10⁶–10⁹Ω (permanent, ANSI/ESD S541) |
| Emergency design | One-hand latches, >100° lid, reflective marking |
Product Feature Breakdown
ESD performance on Anti-Static First Aid Case for Broadcasting is graded by surface resistivity: conductive 10³–10⁵Ω, dissipative 10⁶–10⁹Ω, antistatic 10⁹–10¹¹Ω. Component handling normally calls for the dissipative band, avoiding the high transient current of a fast discharge. kexinMaterials configures to ANSI/ESD S541.
Response cases must work at night and in low visibility: specify high-contrast body colours (orange/yellow) with reflective tape and fluorescent markings on Anti-Static First Aid Case for Broadcasting, plus colour-zoned inserts so a missing item is visible at a glance. kexinMaterials offers EN ISO 20471 compliant reflective options.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Clean liner | XLPE cross-linked foam, non-shedding, disinfectable | Generic foam sheds onto instruments |
| Temperature | Optional insulation + ice-pack bay, 2–8°C short hold | No control, cold chain breaks |
| Rating | IP67, blocks liquid ingress | Plain cases not waterproof |
| Labeling | Biohazard/sharps silkscreen supported | No professional marking |
| MOQ | From 50 pcs, infection-control custom | Mostly off-the-shelf |
| Certification | Material & REACH docs provided | Incomplete compliance |
ESD protection: interior materials hold surface resistance in the 10^6–10^9 ohm range, with conductive shell compounds optional, protecting PCBs and static-sensitive devices.
Standards & Industry Data
IP Ratings (IEC 60529)
In IP67, the “6” means dust-tight (no dust ingress after a 2 kPa vacuum dust test) and the “7” means temporary immersion: the enclosure survives 30 minutes at 1 m depth with its highest point at least 150 mm below the surface, per IEC 60529 Clause 14.2.7.
Export Compliance Essentials
EU-bound cases require CE marking and REACH compliance (phthalates such as DEHP/DBP each below 0.1% in soft parts); hard cases sold via Amazon FBA need ISTA 3A transit-drop certification; shipping drones or devices with lithium batteries additionally involves UN38.3 and IATA rules. A legitimate source factory provides these test reports directly.
Foam Inserts (EVA / PU / XLPE)
Three insert materials dominate: EVA (closed-cell, waterproof, firm support for precision instruments), PU foam (open-cell, soft cushioning, economical) and XLPE (chemically inert, non-shedding — preferred for medical and optics). CNC pockets are cut from the equipment's 3D data; drawing-to-first-sample typically takes 1–2 weeks.
Typical Applications
- Vaccine and biologics cold-chain delivery
- Ambulance and pre-hospital emergency kits
- Inter-lab biological specimen transfer
- Clinical trial material logistics
- Disaster medical relief pre-positioning
- Corporate and household first-aid storage
Product Overview
The kexinMaterials Anti-Static First Aid Case for Broadcasting is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Anti-Static First Aid Case for Broadcasting can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Anti-Static First Aid Case for Broadcasting ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Anti-Static First Aid Case for Broadcasting passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Cold-chain bodies are double-walled and PU-foamed in one operation for gap-free insulation; first-aid cases are lightweight injection molded with modular interiors. Cold models ship with measured temperature-hold curves for your validation files.
Field Case Studies
1,500 vaccine cold-chain cases with XLPE liner and ice-pack bay holding 2–8°C short-term; passed infection-control acceptance.
2,200 surgical-instrument transit cases with biohazard silkscreen and full REACH documentation.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.