Anti-Static ESD Stackable Tool Box for Surveying is an engineered protective case in the tool box family: built by source factory kexinMaterials with IP67 sealing, impact-resistant PP copolymer or rotomolded PE shells and CNC-cut custom foam; wholesale, OEM and export supported.
An industrial tool box organizes tools, parts and consumables with structural strength, reliable latches and modular trays for workshops, maintenance and field service.
Anti-Static ESD Stackable Tool Box for Surveying: Product & Manufacturer Overview
kexinMaterials supplies the Anti-Static ESD Stackable Tool Box for Surveying factory-direct to hardware channels, industrial supermarkets and MRO platforms — private label, bundled SKUs and fast replenishment supported, with Guangdong stock dispatching within 48 hours.
In line-side logistics, stacking strength and footprint modularity drive warehouse efficiency. kexinMaterials crates follow the 600×400 pallet module, stack 5–8 layers static, and carry RFID/barcode slots for material traceability.
Key Specifications
| Material | High-toughness modified PP / HDPE |
|---|---|
| Load | 20–50 kg per box, 5–8 layer static stacking |
| Sizing | 600×400 pallet module plus full size run |
| Management | Label slots, RFID bays, seal holes |
| Interior | Movable dividers / part bins / tool trays |
| Special models | ESD-safe, flame-retardant, IP67 sealed |
| ESD | Surface resistivity 10⁶–10⁹Ω (permanent, ANSI/ESD S541) |
| Stacking | Interlocking location, 1200×1000 pallet compatible |
Product Feature Breakdown
ESD performance on Anti-Static ESD Stackable Tool Box for Surveying is graded by surface resistivity: conductive 10³–10⁵Ω, dissipative 10⁶–10⁹Ω, antistatic 10⁹–10¹¹Ω. Component handling normally calls for the dissipative band, avoiding the high transient current of a fast discharge. kexinMaterials configures to ANSI/ESD S541.
Stacked applications must be assessed dynamically: in forklift handling and vehicle braking, Anti-Static ESD Stackable Tool Box for Surveying carries lateral inertial loads, so incline-impact or vibration-table testing is needed, not just static compression. kexinMaterials can supply ISTA 3E simulated-transport reports.
Protecting optics in Anti-Static ESD Stackable Tool Box for Surveying is about controlling deflection and humidity: lens-group alignment is measured in micrometres, and shell deformation under stacking or impact transmits through the liner to the barrel. kexinMaterials uses suspended supports in optics cases so equipment never sits on the shell's load path.
How kexinMaterials Compares
| Dimension | kexinMaterials | Generic market cases |
|---|---|---|
| Strength | Ribbed shell, holds under stacking | Thin walls collapse |
| Dividers | Adjustable baffles + tool-positioning foam | Fixed grids fit poorly |
| Latches | Steel latches, optional combo lock | Plastic clips break |
| Rating | IP65 dust/splash optional | Usually non-protected |
| MOQ | From 50 pcs, kit customization | Mostly stock |
| Use | Auto/electrician/jobsite proven | Lacks scenario proof |
ESD protection: interior materials hold surface resistance in the 10^6–10^9 ohm range, with conductive shell compounds optional, protecting PCBs and static-sensitive devices.
Standards & Industry Data
Shell Materials Compared (PP / ABS / PE)
Industry data puts PP (polypropylene) at ~55% of plastic protective-case share — strong chemical resistance, low-temperature toughness and cost efficiency; ABS holds ~30% with harder, glossier surfaces; large thick-wall cases favor rotomolded PE. Plastic/polymer cases together account for 63.7% of the industrial protective case market (2025).
Foam Inserts (EVA / PU / XLPE)
Three insert materials dominate: EVA (closed-cell, waterproof, firm support for precision instruments), PU foam (open-cell, soft cushioning, economical) and XLPE (chemically inert, non-shedding — preferred for medical and optics). CNC pockets are cut from the equipment's 3D data; drawing-to-first-sample typically takes 1–2 weeks.
Military Drop Test (MIL-STD-810H, Method 516.8 Proc. IV)
MIL-STD-810H (8th revision, 2019; 29 test methods) requires transit-drop samples to survive 26 drops from up to 5 ft (1.5 m) onto steel-backed concrete in varied orientations. Versus 810G, the H revision raised drop height from 4 ft to 5 ft and switched to a harder steel-backed surface.
Typical Applications
- Machine-shop tool management
- Automotive line-side material turnover
- ESD material flow in electronics plants
- Construction site tool storage
- Field-service engineer tool kits
- Standardized warehouse containers
Product Overview
The kexinMaterials Anti-Static ESD Stackable Tool Box for Surveying is one-piece molded from engineering plastics, balancing impact strength, sealing and long-term durability — available from stock or fully customized. Key specs below.
On process: the Anti-Static ESD Stackable Tool Box for Surveying can be injection, rotational or blow molded. Injection gives precise sealing and repeatability; rotomolding yields large seamless shells with thick-wall toughness; blow molding suits light, economical builds. kexinMaterials runs all three lines and matches the process to your protection grade and budget.
For interior protection, the Anti-Static ESD Stackable Tool Box for Surveying ships with or accepts CNC-cut EVA/PE foam, routed to your equipment's 3D data so nothing shifts in transit; precision instruments can add ESD-safe or cushioned layered structures.
On quality, the Anti-Static ESD Stackable Tool Box for Surveying passes batch drop, stack and immersion checks; key models can be tested to MIL-STD-810H for drop and vibration, with material and third-party test reports supplied for export and industry acceptance.
Manufacturing Process
Injection molding secures latch and hinge life; double-wall blow molding adds impact strength at equal weight. Every load-bearing design passes full-load stacking and drop tests.
Field Case Studies
3,500 technician tool boxes with adjustable baffles and steel latches, standardized across stores.
2,000 electrician inspection boxes with tool-positioning foam, noticeably cutting loss rates.
About kexinMaterials
KeXin New Materials (Guangdong) Co., Ltd. (brand: kexinMaterials) is a source factory for engineered plastic cases based in Guangdong, China, operating injection, rotational and blow molding lines with an in-house tool shop. Nine product series serve buyers worldwide — from military and drone cases to medical, photography and business lines.
Why kexinMaterials: factory-direct pricing with no middle-man margin; three molding processes under one roof; in-house tooling for controlled lead times; batch drop and seal testing; factory audits, samples-first and third-party QC all supported.